banner
Home » Knowledge » Content
Product Categories

How to clean and maintain all parts of the smart toilet?

- Apr 21, 2018 -

1, on the machine and the lower body: the machine and the lower body can be disassembled to clean, as long as the machine is gently lifted, it can be easily removed, and with water, power off.

2. Body: After separating the seat ring and the seat cover in the correct way, the contaminated parts can be thoroughly cleaned. When cleaning, wipe it with a soft cloth that is wrung out of water. Do not wipe it with detergent or medicine so as not to damage the parts. After cleaning, replace it.

3, filter: When the dirt plugs into the water filter, it may cause flushing water pressure is not enough, so regular cleaning. Cleaning steps:

A: Close the inlet valve;

B: Use a special tool to unscrew the drainage network;

C: Clean the dirt with a toothbrush or a small brush.

4, spout: press the nozzle cleaning button, there is water overflow around the nozzle, used for nozzle cleaning; use a hand to pull out the nozzle and grip, to clean the nozzle and nozzle parts; cleaning with a soft cloth dipped in water; final press Stop button, stop spraying.

5, cleaning deodorant box and deodorant inhalation mouth, if there is still odor, please replace the deodorant; deodorant box and deodorant inhalation mouth with dust, or other attachments, the amount of inhaled air will be reduced You can use a toothbrush or a small brush to clean the dust. In winter, to prevent damage to the smart toilet due to ice formation, please drain the remaining water when not in use. If you do not use it for a long period of time, you should also drain it. Water leftover steps:

A: Close the inlet valve;

B: Remove the drain bolt after unscrewing;

C: Re-tighten the drain bolt after the remaining water is drained.